ADEKA STOPS WATER
USE ADEKA TO WATERSTOP
NSF watertanks
WTP (water treatment plants)
WWTP (waste water treatment)
Dams
Tunnel Segments
Sheet Pile Interlocks
Flood Control
Piping Penetrations
Precast Segments
Isolation Joints
Expansion Joints
Construction Joints
Cold Joints
Utility Vaults
Manholes
H Piles
Crack Repair
Cooling Towers
Reservoirs
Containment Areas
AND MUCH MORE....
° P-201
A water-swelling single component, elastic sealant. P201 is packaged in 320 ml (10.8 oz) cartridges or in 3.17 gallon bulk pails.
° MC-2010MN
Pre-formed rubber strip with stainless steel mesh. Size, 20mm X 10mm, (Approximately 3/4" X 3/8"). Used to replace conventional PVC waterstops in construction joints and control joints. Packaged in 82 feet per case.
° MC-2005T
Pre-formed rubber strip with adhesive back.Size, 20mm X 5mm, (Approximately 3/4" X 1/4"). Typically used in piping penetrations, H-pile waterstops, and cold/construction joint applications. Packaged in 330 feet per case.
° A-30
Pourable two componentwaterstop (15:1 ratio) for sheetpile interlocks. One set equals 4 gallons.° ULTRASEAL P-201
Paste type in 11 oz. cartridges. Used in many different applications such as piping penetrations, sheetpile interlocks, rough surfaces, crack repair, etc. One of the most versatile Adeka products.°
° KBA-1510FP
Pre-formed rubber strip . Size,15mm X 10mm. Used in areas where concrete coverage in minimal. See datasheet for conditions of use.
° KM-3030M
Pre-formed rubber strip . Size,30mm X 30mm, (Approximately 1.2" X 1.2"). Used in expansion joints.Stainless steel wire mesh to control and focus expansion. Three timesexpansion by volume.
° KM STRING
Pre-formed string. Size, 4mm ~ 40mm, (Approximately 0.2" ~ 1.6"). Used to waterproof sheetpiles, cracks where running water is present. String size should be 1.2 times the width of the gap. Packaged according to size of string.